Stonhard Delivers High-Performance Solution for Lithium Battery Production Facility

Stonkote GS4, an epoxy coating designed for chemical and wear resistance, was selected for this industrial flooring project. Known for its long-term durability, abrasion resistance, stain resistance, and gloss finish, Stonkote GS4 not only enhances light reflectivity but also delivers a clean, professional appearance.

Stonhard completed surface preparation in just three days, ensuring the new concrete substrate was ready for the installation of the coating system. High-strength grout was used to patch the surface, followed by the application of a high-solids primer. After allowing the floor to cure, the epoxy coating was installed. Joints were then cut and filled with backer rod and a flexible polyurethane sealant, a method that ensures the coating remains intact and resistant to cracking caused by joint movement. The result is a durable, high-performance floor that meets the demands of a bustling industrial environment while maintaining a polished, professional look.

For battery manufacturers, Stonhard delivers critical protection against corrosive agents while providing smooth, easy-to-maintain surfaces that enhance operational efficiency and simplify facility maintenance. With unmatched technical expertise and a wide range of flooring solutions, Stonhard won the project despite fierce competition. The installation was successfully completed within the client’s tight 11-day timeline.